Item # DEPE401615, Pedestal Enclosures

Nema-3R-Pedestal-EnclosureDudlik Large Single Door enclosures give easy access for installation and maintenance of a wide variety of electronic and electrical equipment. Suitable for indoor or outdoor use, these enclosures provide protection from the elements and vandalism. Standard configurations are available for NEMA 3R, 4, and 4X style applications.

 

watch our video

icon pdf  Download product cut-sheet

 


Specifications:

Cabinet Height (A) 40.00 in
Cabinet Width (B) 16.00 in
Cabinet Depth (C) 15.00 in
Opening Height (D) 32.62 in
Opening Width (E) 13.00 in
Available Space Depth (F) 34.62 in
Available Space Height (G) 11.81 in
Door Height (H) 34.87 in
Pad Mounting Pattern Width (I) 11.25 in
Pad Mounting Pattern Depth (J) 13.31 in
Panel Size Height (K) 34.62 in
Panel Size Width (L) 13.25 in

Options:

  • Front door switch compartment
  • Locks and keying other than standard
  • Painted finishes
  • Panels
  • Three-point latching system

Construction:

To ensure a strong and rigid construction, these enclosures are manufactured from 0.125" 5052-H32 marine-grade aluminum. They may also be ordered in 14-gauge (0.075") type 304 stainless steel. All external hardware is stainless steel to provide a high degree of protection from corrosion. Internal hardware is stainless steel or zinc plated, meeting Fed. Spec. QQ-Z-235C Type 1.

The top of the enclosure is made from 0.250" 5052-H32 aluminum and is welded around the entire perimeter. The top is supplied with a 2.50" diameter hole and four 0.625" diameter holes on a 4" diameter bolt circle oriented 45 degrees to the enclosure.

A 0.125" 5052-H32 aluminum plate is provided as a cover for the top hole pattern. The cover is attached with two 1/4-20 stainless steel carriage bolts with Nylock nuts.

Smooth and free of blow holes, flaws, or imperfections, all seams are continuously welded (GTAW) or sealed with G.E. Silicone Sealant (or equivalent) in the interior or on the exterior.


Cabinet:

The enclosure has a plywood panel 3/4" x 13 1/4" x 34 5/8" for the mounting of equipment.

The enclosure door opening is double flanged on all four sides. This feature not only provides strength, but also prevents dirt and liquids from dropping into the enclosure when the door is in the open position.

All surfaces, edges, and openings are smooth and burr-free for worker safety and equipment protection.


Doors:

The cabinet door is attached to the body of the enclosure by means of two 0.075" stainless steel, piano-type hinges on the right side. They are bolted to the door and to the cabinet with 1/4-20 stainless steel carriage bolts and Nylock nuts. Further, the 0.25" stainless steel hinge pins are welded on the top to prevent tampering.

The door is sealed with a closed cell neoprene gasket bonded to the inside of the door with an oil-resistant adhesive.

The door lock is a Corbin #R357SGS, or equivalent, with a keyhole cover.


Finishes:

Painted finishes are available. Supply a sample of paint color (chip) or a paint number in compliance with MIL standard 595.

Powder coat finishes are also available.

Standard enclosures are provided with a smooth and uniform, natural aluminum finish (Mill finish to Fed. Spec. QQA-250/8).


Mounting:

The enclosure is designed as a pad mounting unit, as shown in the supplied diagram. The base has provisions for mounting with four anchor bolts.


 

 

Contact Us Today!