Item # DESSD4X161208, Small Single Door Enclosures

Single Door Enclosure

These compact Small Single Door enclosures provide convenient housing and protection of a wide variety of electronic controls, and electrical equipment. Suitable for indoor or outdoor use, they provide protection from the elements and vandalism.


watch our video

icon pdf  Download product cut-sheet



Cabinet Height (A) 16.00 in
Cabinet Width (B) 12.00 in
Cabinet Depth (C) 8.00 in
Opening Height (D) 14.25 in
Opening Width (E) 9.75 in
Available Space Depth (F) 14.25 in
Available Space Height (G) 6.66 in
Door Height (H) N/A
Pad Mounting Pattern Width (I) 9.00 in
Pad Mounting Pattern Depth (J) 13.00 in


  • Painted Finishes

  • Panels

  • Shelves

  • Windows


To insure a strong and rigid construction, these enclosures are manufactured from 0.125" 5052-H32 marine grade aluminum.  They may also be ordered in 14 gauge (0.075") type 304 stainless steel. All external hardware is stainless steel to provide a high degree of protection from corrosion. Internal hardware is stainless steel or zinc plated, meeting Fed. Spec. QQ-Z-235C Type 1.

Smooth and free of blow holes, flaws, or imperfections, all seams are continuously welded (GTAW) or sealed with (G.E. Silicone Sealant or equivalent) in the interior or on the exterior.


The enclosure door opening is double flanged on all four sides.  This feature not only provides additional strength, but prevents dirt and liquids from dropping into the enclosure when the door is opened.

All surfaces, edges, and openings are smooth and burr-free for worker safety and equipment protection.


The cabinet is designed so that the leaves of the hinges are not exposed, making the hinges tamper-proof and presenting a neat and clean appearance. The cabinet door is attached to the body of the enclosure by means of a continuous 0.075" stainless steel pianotype hinge on the right side. It is bolted to the door and to the cabinet with 1/4-20 stainless steel carriage bolts and Nylock nuts. Further, the 0.25" stainless steel hinge pin is welded on the top to prevent tampering. 

The door is sealed with a closed cell neoprene gasket bonded to the inside of the door with an oil resistant adhesive.

Door security is provided by two (2) quarter turn fasteners and a hasp for a padlock.


Standard enclosures are provided with a smooth and uniform, natural aluminum finish (Mill finish to Fed. Spec. QQA-250/8).

Painted finishes are available. Supply a sample of paint color (chip) or a paint number in compliance with MIL standard 595.

Powder coat finishes are also available.


The mounting flanges have holes for wall mounting and vertical slots for pole mounting using banding.


Contact Us Today!